Load-rated supports for fiberglass, HDPE, PVC and CPVC pipe and duct from 1-1/4 in. to 120 in. — from the originator and manufacturer of the JOVE® line.
Fiberglass cracks where a steel edge bears on the corrosion barrier. HDPE creeps out from under a clamp that held fine at startup. Every JOVE® support is designed around how non-metallic pipe actually behaves.
Low Yield Strength
Load is spread over a wide, contoured bearing area matched to the pipe OD.
Thermal Expansion
HDPE grows up to ten times more than steel. Guides and anchors are spaced for it.
Creep
Wide bearing areas and controlled clamping, not a friction grip that loosens.
Corrosion Barrier
An elastomeric liner on every support keeps steel edges off the pipe.
Available Product Types
TF-JOVE® Model Families
Load ratings are published by model and pipe diameter. Low-profile supports run 3/8 in. to 1-5/8 in. BOP/TOS and high-profile supports 4 in. Any BOP/TOS dimension can be modified — contact TF-JOVE®.
Pipe Clamps
FS-1, FS-2, FS-2R and FS-9 lined clamps in profile heights from 3/8 in. to 4 in.
Component Supports
FS-3 and FS-5 supports for valves, actuators and expansion joints, rated vertically and axially.
Guided Hangers
FS-4G and FS-4GR for pipe hung below steel. FS-4GR adds slots for insulation banding.
Hangers & Riser Supports
FS-6 split clamps for hangers, risers and guides, including the FS-6Q heavy-duty riser anchor.
Anchors
FS-10 anchors with bonded shear collars carry axial thrust into the structure
Pipe Supports & Auxiliary Steel
Supports delivered with the T-poles, frames and braces they mount to, designed and built in-house.
Technical Highlights
Engineering & Calcs Done In-House
Send pipe properties and a plan. We locate every support, define its type and calculate the load it carries.
Stress Analysis
FRP and HDPE piping systems
FEA Validation
When a standard rating isn't enough
Locator Drawings
Every support keyed to your plans
Auxiliary Steel
T-poles, frames and braces, built in-house
Where We Serve
Industries & Applications
JOVE® non-metallic supports are specified wherever corrosive service rules out steel pipe.
01
Water & Wastewater
Corrosion-proof supports for long-term wet service.