JOVE® Division · Non-Metallic Pipe Supports 

Non-Metallic Pipe Supports for FRP, HDPE & PVC

Load-rated supports for fiberglass, HDPE, PVC and CPVC pipe and duct from 1-1/4 in. to 120 in. — from the originator and manufacturer of the JOVE® line. 

Originator of the JOVE® Line

Load-Rated by Pipe Diameter

1-1/4 in. to 120 in. Pipe & Duct

JOVE® Non-Metallic Overview 

Non-Metallic Pipe Fails at the Support

Fiberglass cracks where a steel edge bears on the corrosion barrier. HDPE creeps out from under a clamp that held fine at startup. Every JOVE® support is designed around how non-metallic pipe actually behaves. 

Low Yield Strength

Load is spread over a wide, contoured bearing area matched to the pipe OD.

Thermal Expansion

HDPE grows up to ten times more than steel. Guides and anchors are spaced for it.

Creep

Wide bearing areas and controlled clamping, not a friction grip that loosens.

Corrosion Barrier

An elastomeric liner on every support keeps steel edges off the pipe.

Available Product Types

TF-JOVE® Model Families

Load ratings are published by model and pipe diameter. Low-profile supports run 3/8 in. to 1-5/8 in. BOP/TOS and high-profile supports 4 in. Any BOP/TOS dimension can be modified — contact TF-JOVE®. 

lined-clamp-lineup-7501

Pipe Clamps

FS-1, FS-2, FS-2R and FS-9 lined clamps in profile heights from 3/8 in. to 4 in. 

galvanized-pipe-shoes

Component Supports

FS-3 and FS-5 supports for valves, actuators and expansion joints, rated vertically and axially. 

Guided Hangers

FS-4G and FS-4GR for pipe hung below steel. FS-4GR adds slots for insulation banding. 

fs6-riser-clamp-render

Hangers & Riser Supports

FS-6 split clamps for hangers, risers and guides, including the FS-6Q heavy-duty riser anchor. 

los-alamos-tilt-rotator

Anchors

FS-10 anchors with bonded shear collars carry axial thrust into the structure

Pipe Supports & Auxiliary Steel

Supports delivered with the T-poles, frames and braces they mount to, designed and built in-house. 

Technical Highlights 

Engineering & Calcs Done In-House

Send pipe properties and a plan. We locate every support, define its type and calculate the load it carries. 

Stress Analysis

FRP and HDPE piping systems

FEA Validation

When a standard rating isn't enough

Locator Drawings

Every support keyed to your plans

Auxiliary Steel

T-poles, frames and braces, built in-house

Where We Serve

Industries & Applications

JOVE® non-metallic supports are specified wherever corrosive service rules out steel pipe. 

01

Water & Wastewater

Corrosion-proof supports for long-term wet service.

02

Chemical Processing

Supports matched to aggressive process chemistry. 

03

Pulp & Paper

Lined supports for bleach and process lines.

04

Power Generation

FRP cooling water and scrubber piping. 

05

Semiconductor & Pharma

Clean supports for high-purity process lines.

06

Desalination

Large-diameter FRP and HDPE brine and seawater lines.